1. Tap Settings.
2. Tap Location & Time Zone.
3. Enter the new location code. Tap Help me find my scale location code or see the list of
location codes in the related topics section.
4. Enter the time zone.
5. Tap Apply.
Advancing the date
Advance the date to print postage up to thirty days before you need to send it.
1. Tap Envelope Printing on the Home screen.
2. Tap the date. The calendar appears.
3. Tap Tomorrow or Another Date, depending on the date you wish to print.
4. Tap No Date to exclude the date.
5. When you see the future date highlighted on the calendar, tap Apply.
6. Insert the envelope into the device. The device prints the postage.
Important: The date on the postage should match the date when your mail goes to the post office.
Your device automatically advances the printed date on the device stamp (as well as its internally held
date) when the device time reaches 5:00 PM. You cannot change this time.
Creating or disabling the security PIN
Create a security PIN to prevent unauthorised use of your device.
If you created a security PIN when you installed your device, you must enter it when you turn your
device on or after it enters sleep mode.
Create a security pin
1. Tap Settings.
2. Tap Security PIN in the Device & Network section.
12 • Settings
Pitney Bowes User Guide November 2021 88
To Next Page
Loading...
