5. Enter the settings you obtained in step 4 for the IP Address, Netmask, Gateway, and DNS
Address in the corresponding fields.
6. Tap Connect.
7. If SendPro C fails to connect, remove the network cable from the back of the device.
8. Tap Connect. Wait for the attempted connection to fail.
9. Plug the network cable back in.
10. Delete the values in the IP Address, Netmask, Gateway, and DNS Address fields.
11. Enter the IP Address, Netmask, Gateway, and DNS Address that you obtained in step 4.
12. Tap Connect.
Setting up a wireless (Wi-Fi) network connection
You can connect your SendPro C with a wireless network connection.
1. Tap Settings.
2. Tap Wi-Fi in the Device & Network section.
3. Choose your Wi-Fi network from the list. Tap Add Network if your Wi-Fi network does not
appear.
4. Enter your Wi-Fi password.
Tip: Use the show password option to make sure that you enter your password correctly.
5. Tap Advanced Options if your network requires advanced network settings such as a Static IP
address:
l
To set up a Static IP address:
a. Select the IP Setting menu and choose Static.
b. Tap on the line and enter the value provided by your IT department.
c. Tap the >in the green circle.
Connecting to a hidden Wi-Fi network
Add a network when you want to connect using Wi-Fi and your network is not present in the Wi-Fi list.
1. Tap Settings.
2. Tap Wi-Fi in the Device & Network section to see a list of available networks.
2 • Connectivity
Pitney Bowes User Guide November 2021 27
To Next Page
Loading...
