User’s Manual of IMG-2x00T Modbus Gateway Series
2.1.3 Front Panels
The Reset Buttons of the Modbus Gateways are shown in Figure 2-1-2.
IMG-2100T IMG-2102T / IMG-2102TS IMG-2105AT
IMG-2200T IMG-2400T
Figure 2-1-2: Reset Button of Modbus Gateways
Reset button
On the bottom panel, the reset button is designed for rebooting the system and stopping the buzzer. The following is the
summary table of the reset button functions:
Reset Button Reset Button Pressed and Released Function
System Reset
< 5 sec: System reboot Reboot the Industrial Serial Server
> 5 sec: Factory default
Reset the Industrial Serial Server to Factory
Default configuration. The Industrial Serial
Server will then reboot and load the default
settings as shown below:
。 Default Username: admin
。 Default Password: admin
。 Default IP address: 192.168.0.100
。 Subnet mask: 255.255.255.0
。 Default Gateway:
Buzzer Reset >1 sec Stop the buzzer