User’s Manual of IMG-2x00T Modbus Gateway Series
4.7 Maintenance
Use the Port Menu to display or configure the Modbus Gateway's ports. This section includes the page that displays current port
configurations. Ports can also be configured here.
4.7.1 Change Password
After logging in to the Modbus Gateway, user can make changes from the "Change Password" page. The Change Password
screen in Figure 4-7-1 appears.
Figure 4-7-1: Change Password Page Screenshot
The page includes the following fields:
Object Description
• New Password
A new password. It allows strings like A-Z, a-z, _ ,0-9
• Confirm Password
Please enter the user’s new password here again to confirm.
4.7.2 Load Default
A user can reset the configuration of the Modbus Gateway on this page. The new configuration will applied after restarting
system. The Load Default screen in Figure 4-7-2 appears.
Figure 4-7-2: Reset to Default Page Screenshot
Buttons
: Click to reset to default.
Users can also export or import configuration settings of the Modbus Gateway on this page. The old configuration will be applied
after import the config. The Export or Import Setting screen in Figure 4-7-3 appears.
Figure 4-7-3: Export or Import Setting Page Screenshot
To Next Page
Loading...
Need help?
General
