User Manual of VDR-300NU
Figure 5-2-13
Object Description
PPP Username
The correct user name provided by your ISP.
PPP Password
The correct password provided by your ISP.
PPPoE Service Name
If your ISP provides it to you, please enter it. If not, do not enter any
information.
Authentication
Method
The value can be AUTO, PAP, CHAP, or MSCHAP. Usually, you
can select AUTO.
Enable Fullcone NAT
NAT is one where all requests from the same internal IP address
and port are mapped to the same external IP address and port.
Furthermore, any external host can send a packet to the internal
host, by sending a packet to the mapped external address.
Dial on demand
(with idle timeout timer)
If this function is enabled, you need to enter the idle timeout time.
Within the preset minutes, if the modem does not detect the flow of
the user continuously, the modem automatically stops the PPPoE
42
To Next Page
