5 SAFETY PRECAUTIONS
User’s & installation manual Planmeca ProScanner 7
Use the device only with accessories sup-
plied with this device.
This device is intended to be grounded. Plug
power cord into properly grounded electrical
outlets. This cord is equipped with three-
prong plugs to help ensure proper ground-
ing.
This device contains static sensitive compo-
nents. Proper static handling procedures
and equipment must be used when servicing
this device.
Do not open the device.
If any of the following conditions occur,
unplug the device from the electrical outlet
and contact authorized service personnel:
• The power cord, the power adapter or the
Planmeca ProID USB cable has been damaged.
• An object has fallen into the device.
• The device has been exposed to water.
• The device has been dropped or damaged.
• The device does not operate correctly when the
operating instructions are followed.
To Next Page
Loading...
Need help?
General
