20 TECHNICAL SPECIFICATIONS
User’s & installation manual Planmeca ProScanner 51
20.1 Operating conditions
Indoor use only.
Operating temperature 15°C ~ 30°C (59°F ~ 86°F)
Temperature gradient 0.5°C / Min
Relative humidity 15% ~ 95% (non-condensing)
Storage temperature -10°C ~ 50°C (14°F ~ 122°F)
Storage humidity 15% ~ 95% (non-condensing)
Storage atmospheric pressure 500 ~ 1,060 hPa
Transportation temperature -10°C ~ 50°C (14°F ~ 122°F)
Transportation humidity 15% ~ 95% (non-condensing)
Transportation atmospheric pressure 500 ~ 1,060 hPa
Installation category II
Pollution degree 2
Ingress of liquids IPX0
Altitude Up to 2,000m
Protective class Class 1
Equipment maintenance No user maintenance is required and no
service is allowed. Please contact
technical support if there is a problem.
To Next Page
Loading...
