Planmeca ProScanner - 17 Cleaning the ProScanner

17 CLEANING PLANMECA PROSCANNER
User’s & installation manual Planmeca ProScanner 47
17 CLEANING PLANMECA PROSCANNER
NOTE
Do not try to clean inside the Planmeca
ProScanner.
WARNING
There are no user serviceable parts inside
the Planmeca ProScanner and Planmeca
ProID reader. They should only be opened
and serviced by qualified service personnel.
Failure to heed this warning may result in
injury to service personnel or damage to
equipment, and void any and all warranties.
In case of a service problem, please contact
Planmeca or an authorized dealer.
To remove dust wipe outside of the scanner with
soft and dry cloth.
17.1 Tray
Clean the tray using soft lint-free cellulose cloth
dampened with ethanol (99.7%).
17.2 Planmeca ProID RFID reader
Wipe the outside of the reader to remove dust,
using a soft and dry cloth.