19 DISPOSAL
User’s & installation manual Planmeca ProScanner 49
19 DISPOSAL
Improper disposal of this product may result
in environmental contamination. When dis-
posing of this equipment, contact Plan-
meca’s representative or related organs of
government. Do not dispose of any part of
this equipment without consulting a Plan-
meca’s representative first.
Planmeca does not assume any responsibility
for damage resulting from disposal of this
equipment without consulting Planmeca.
In order to reduce the environmental load over
the product’s entire life cycle, Planmeca’s
products are designed to be as safe as possible
to manufacture, use and dispose of.
Parts which can be recycled should always be
taken to the appropriate processing centres,
after hazardous waste has been removed.
Disposal of obsolete systems is the
responsibility of the waste possessor.
All parts and components containing hazardous
materials must be disposed of in accordance
with waste legislation and instructions issued by
the environmental authorities. The risks involved
and the necessary precautions must be taken
into account when handling waste products.
If the component boards cannot be recycled
handle them as electronic scrap, i.e. according
to the local legislation.
To Next Page
Loading...
