54 Planmeca ProScanner User’s & installation manual
Appendix B: Installing Planmeca
ProScanner on MacOS
B.1 Romexis and ProScanner USB driver installation
The Planmeca ProScanner USB does not
require a separate driver installation as the
driver is installed automatically during Planmeca
Romexis client installation. Therefore (contrary
to Windows version):
• During Romexis client installation no
ProScanner option selection is required.
• The driver cannot be found separately in the
DidapiKit for Mac.
B.2 ProID driver installation
Planmeca ProID does not require a separate
driver installation on MacOS. Driver is installed
automatically during Romexis client installation.
B.3 Connecting scanner to network
Please follow the instructions in section 9.7
"Connecting scanner to network" on page 26.
On Mac OS the FireCR.ini file is located under
Romexis client installation folder.
To Next Page
Loading...
Need help?
General
