6
46
General fault codes
Clear Misfeed(s)
In general, fault codes indicate a misfeed condition.
When a misfeed occurs, the message “Clear
Misfeed(s)”, a code and the jam area will be
displayed. See section 5. Clearing Misfeeds, for how
to clear a misfeed.
Close cover(s)
When the message “Close Cover(s)” is displayed
any of the interlock switches are actuated.
Check that the top cover is in down position.
Make sure that the cover of the Belt Stacker
is in normal position, see section 5, Clearing
Misfeeds, Exit area.
To Next Page
Loading...
