6
48
Code “CF-501 Load covers” is displayed when covers run low. There are two ways to continue
operation.
Loading more cover sheets:
Load more cover sheets according to section 2. Making Booklets and press the [Done]
button. Code CF-501 will extinguish and copier will start.
Using up the remaining cover sheets that are loaded:
Press the [ESC] button. Code CF-501 will extinguish and copier will start.
Note
Be aware that if you use this method, the system will hard stop i.e. without completing
the cycle when there is no covers left.
Code “CF-503 Load covers” is displayed when covers are empty. There are two ways to
continue operation.
If you wish to continue production:
Load cover sheets according to section 2. Making Booklets and press the [Done] button.
Code CF-501 will extinguish and copier will start.
If cover job is nished and you wish to run a new job without covers:
Select Cover Off in the Cover menu.
Load covers
Cover feeder fault codes, continues
To Next Page
Loading...
