GENERAL INFORMATION
1.2
MODEL IDENTIFICATION
The machine model number must be used with any correspondence regarding warranty or service.
Machine Model Number Identification
Year Designation
Basic Chassis
Designation Engine Designation
A09BG50AA
Emissions &
Model Option
ENGINE DESIGNATION NUMBERS
EH500PLE Single, Liquid Cooled, SOHC 4 Stroke, Electric Start.................
VIN IDENTIFICATION
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17
4XABA
50A* P000000
Vehicle Descriptor
Vehicle Identifier
Powertrain
Engine
Emissions
Model
Year
Plant No.
Individual Serial No.
Body Style
Check Digit
World Mfg. ID
* This could be either
a number or a letter
9
ENGINE SERIAL NUMB ER LOCATION
Whenever corresponding about a vehicle, be sure to refer to the engine model number and serial number. This
information can be foundon thesticker applied to therecoil housing on theright sideof engine.(A) Anadditional
number is stamped on the center top of crankcase beneath the cylinder coolant elbow.
UNIT MODEL NUMBER AND SERIAL NUMBER LOCATION
Themachinemodelnumberandserialnumberare
important for vehicle identification. The machine
serial number is stamped on the lower left side of
the frame tube.(B)
TRANSMISSION I.D. NUMBER
LOCA
TION
A
B
Front
The transmission I.D. number is located
on top of the transmission, right side of
machine.
To Next Page
Need help?
General
