MAINTENANCE
2.12
TRANSMISSION LUBRICATION
The transmission lubricant level should be checked
and changed in accordance with the maintenance
schedule.
G Be sure vehicle is level before
proceeding.
G Check vent hose to be sure it is
routed properly and unobstructed.
G Follow instructions on following
pages to check / change
transmission lubricant.
Specified Lubricant:
Polaris AGL Gearcase Lubricant (PN 2873603)
(Gallon) (PN 2873602) (12 oz.)
Capacity: 4x4 -- 32 oz. / 945 ml
Drain Plug / Fill Plug Torque:
14 ft. lbs. (19.4 Nm)
TRANSMISSION SPECIFICATIONS
4x4 Models
To check the level:
1. Removepropshaftshieldfromtherightsideofthe
vehicle.
2. Remove fill plug and visually inspect the oil level.
Level is correct when it reaches thebottom of the
fill hole as shown below.
View From Front
Oil Level
15/8″
AGL
To change lubricant:
1. Removepropshaftshieldfromtherightsideofthe
vehicle.
2. Remove transmission drain plug drain the oil.
Catch and discard used oil properly.
3. Clean and reinstall the drain plug with a new
sealing washer. Torque to specification.
4. Remove fill plug.
5. Add Polaris AGL Gearcase Lubricant (PN
2873602) to proper level as described above.
6. Check for leaks.
7. Reinstall propshaft shield.
T ransmission Fill Plug
Do not fill to bottom
of fill plug threads
Right Side View of ATV
To Next Page
Loading...
Need help?
General
