5.28
BODY / STEERING / SUSPENSION
3. Remove the pinch bolt retaining the lower steering shaft to
the power steering unit.
4. While supporting the power steering unit, remove the (4)
nuts from the mount bracket.
5. Carefully remove the power steering unit and mount
bracket from the vehicle as an assembly.
6. If replacing the power steering unit, remove the (4) bolts
that retain the power steering unit to the mount bracket.
Remove
Remove
WARNING
Electronic Power Steering (EPS) units are
programmed to be vehicle specific and are not
interchangeable between product lines.
Remove
www.midwestmanuals.com www.green-manuals.com
To Next Page
Loading...
