EasyManua.ls Logo

Polaris Ranger RZR 800 - Walker Evans Shock Service; Recommended Service Intervals

Polaris Ranger RZR 800
406 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
5.55
BODY / STEERING / SUSPENSION
5
WALKER EVANS™ SHOCK SERVICE
Recommended Service Intervals
Walker Evans™ Racing Shocks will perform the best if serviced at regular intervals:
Every ride - Wash and dry the vehicle and suspension
Every 100 hours - Visually inspect shock seals
Every 500 hours or Annually - Change shock oil and replace seals
Front Shock Service Information Rear Shock Service Information
SHOCK DESIGN DETAILS
Travel (Stroke) 5.313”
Extended Length 16.313”
IFP Location 3.00”
Nitrogen Pressure 200 ± 10 psi
Gas Shock Oil 2874522 (qt.) Walker Evans 5 wt.
SHOCK VALVING
COMPRESSION REBOUND CLICKER
1.55 x .008 1.50 x .012 1.10 x .025
1.00 x .008 1.45 x .010 1.00 x .025
1.50 x .008 1.30 x .008 1.00 x .025
.900 x .008 1.20 x .008 .700 x .010
1.45 x .008 1.10 x .008 .875 x .090
1.10 x .008 1.00 x .008
1.50 x .015 .900 x .008
1.45 x .015 1.00 x .090
1.30 x .015
NOTE: Valve shim stacks
listed as they would appear
on the shaft when shock rod
is locked in a vise (eyelet
down, threaded end up).
1.20 x .015
1.10 x .015
1.00 x .015
.900 x .015
.625 x .065
1.50 x .125
Piston Bleed Orifice: .086
SHOCK DESIGN DETAILS
Travel (Stroke) 5.985”
Extended Length 18.035”
IFP Location 3.00”
Nitrogen Pressure 200 ± 10 psi
Gas Shock Oil 2874522 (qt.) Walker Evans 5 wt.
SHOCK VALVING
COMPRESSION REBOUND CLICKER
1.55 x .008 1.50 x .012 1.10 x .025
1.00 x .008 .900 x .008 1.00 x .025
1.50 x .008 1.45 x .010 1.00 x .025
.900 x .008 1.30 x .012 .700 x .010
1.45 x .008 1.20 x .012 .875 x .090
1.10 x .008 1.10 x .012
1.50 x .015 1.00 x .012
1.45 x .015 .900 x .012
1.30 x .015 1.00 x .090
1.20 x .015
NOTE: Valve shim stacks
listed as they would appear
on the shaft when shock rod
is locked in a vise (eyelet
down, threaded end up).
1.10 x .015
1.00 x .015
.900 x .015
1.50 x .215
Piston Bleed Orifice: .052
www.midwestmanuals.com www.green-manuals.com

Table of Contents

Related product manuals