10.11
ELECTRICAL
10
Trip Meter
The trip meter records the miles traveled by the vehicle on each
trip. To reset the trip meter:
1. Toggle the MODE button to TRIP 1.
2. To reset to 0, push and hold the MODE button until the
distance display changes to 0.
Tachometer (RPM)
Engine RPM can be displayed digitally.
Engine Temperature
Engine temperature can be displayed in Fahrenheit or Celsius.
Refer to “Units of Measurement” to change the format.
Engine Hours
Engine hours are logged anytime the engine is running. Total
hours can not be reset.
Programmed Service Interval
The initial factory service interval setting is 50 hours. Each time
the engine is started, the engine hours are subtracted from the
service interval hours. When the service interval reaches 0, the
LCD wrench icon will flash for approximately 10 seconds each
time the engine is started.
To change the hour setting or reset the function, follow these
steps:
1. Toggle the MODE button until the wrench icon is
displayed in the information area.
2. Press and hold the MODE button until the information
display area begins to flash.
3. Toggle the MODE button to increase the service interval
hours in 5 hour increments to a maximum of 100 hours.
4. To turn off the service interval function, toggle the MODE
button until “OFF” is displayed.
www.midwestmanuals.com www.green-manuals.com
To Next Page
Loading...
Need help?
General
