Polaroid 539957-020 Rev. A User Manual

133
Hints & Tips
• In a PC application, use only one page if sending Encode Only data. A two-
page document will cause an error and the card will not be encoded.
• See How“How to Use Magnetic Stripe Fonts” for information on formatting
data using fonts.
• See “How to Use Magnetic Stripe Escapes” for information on using
escapes to format data.
• You are responsible for using characters supported by the track format. The
driver discards line returns before and after data.
How to Change the LCD Backlight
Begin with the printer “Ready”. The USER button shows steady
green.
1. Press the U
SER button to display “Suspended” on Line 1 of
the LCD panel.
2. Press the E
NTER key to enter the menu system.
3. Press the down arrow key to scroll to the Configuration
menu.
4. Press the E
NTER key to enter the Configuration menu. LCD
Backlight is the first choice on the menu.
5. Press E
NTER to change the LCD Backlight.
6. Press the down arrow key to lower the light level, or press
the up arrow key to increase the level.
7. When the light is the level you want, press the E
NTER key.
The printer saves the setting and returns to the
Configuration menu.
8. Press an arrow key repeatedly to display “Exit” on line 2.
9. With “Exit” displayed on Line 2, press the E
NTER key
repeatedly to exit the menu system.
10. With “Suspended” displayed on Line 1, press the U
SER key.
11. The printer is ready.

Polaroid 539957-020 Rev. A Specifications

General

Brand	Polaroid
Model	539957-020 Rev. A
Category	Printer
Language	English