Polaroid 539957-020 Rev. A User Manual

11
Site Requirements
Set up and use the printer in an
environment that meets the
following requirements.
• Provide space for the printer
and for clearance around the
printer. The printer
dimensions and clearance
area is shown in the table
below.
• Place the printer in an environment with temperatures ranging from 60° F to
95° F (15° C to 35° C).
• Use a single phase, 3-wire, grounded receptacle.
• Keep all dust, dirt, food, and liquids away from the printer.
• Keep paper and foreign materials off the printer.
• Place the printer on a sturdy, level surface.
• Place the printer away from direct sunlight.
• Do not place printer near heating ducts, fans, or other air vents.
• Do not use the printer for purposes other than the intended use.
• Prevent debris from entering the printer.
Printer
Model
Dimensions (inches/mm)
ABCDE FG
P3500S
10.00
254
8.80
224
4.00
102
6.85
174
4.00
102
15.37
390
4.00
102
P3500S with
Smart Card
10.00
254
8.80
224
4.00
102
6.85
174
4.00
102
21.21
539
4.00
102
P5500S
10.00
254
8.80
224
4.00
102
6.85
174
4.00
102
21.21
539
4.00
102
Options such as a large output stacker and 200-card input hopper add height to the
printer. Additional clearance is required when using these options.

Polaroid 539957-020 Rev. A Specifications

General

Brand	Polaroid
Model	539957-020 Rev. A
Category	Printer
Language	English