Polaroid ProCam - Optical Parts Protection from Scratches and Smudges; Tools Required for Disassembly and Reassembly

3 - 6
Optical Parts Protection from Scratches and Smudges
When handling Viewfinder or Shutter Assemblies, wear finger cots or lintless
gloves; also, use plastic tools (e.g., greenstick) or tools with coated jaws, rather
than metal tools, whenever practical.
Tools Required for Disassembly and Reassembly
• Square Drive Tool (Handle - CPS 416, Bit - #13553)
• Dump Probe #13119
• Greenstick (Solder Aid Tool) #941168
• Wrist Strap and Grounded Anti-Static Mat
• Small Phillips and Flat Blade Jeweler’s Screwdrivers
• Needlenose Pliers
• Tweezers
• Penlight Flashlight
• Dental Pick
• Finger Cots/Lintless Gloves