User’s Guide for the Polycom RealPresence Group Series
Polycom, Inc. 21
When you are showing content, a message appears on your main monitor.
Whether you also see the content on your monitor or projector depends on
how your system was configured.
Showing Content with People+Content IP
The People+Content IP application allows you to send content from a
computer that is not connected directly to the RealPresence Group system.
To install People+Content IP on a computer:
1 On a computer with a Microsoft
®
Windows XP, Windows Vista,
Windows 7 or Windows 8 operating system, go to
http://www.polycom.com. In the Search box, type “PPCIP application
download”.
2 Download and install the People+Content IP software.
To start showing content:
1 On your computer, start the Polycom People+Content IP application.
2 Enter the IP address or host name of the RealPresence Group system and
the meeting password, if one is set.
To view the IP address of the RealPresence Group system, select >
System Information > System Detail.
3 On the computer, click Connect.
4 In People+Content IP, open the content you want to show, and click .
To show content on a RealPresence Group 300 system, you must use the
People+Content IP application.
Points to note about People+Content IP:
• People+Content IP provides video-only content. No audio is shared.
• People+Content IP supports any computer desktop resolution with color set to
16-bit or higher.
• Your computer resolution can be set to anything, but People+Content IP scales
the image to 1024x768 or 1280x720.
• The People+Content IP application must be installed on a computer.
If you are using multiple windows on your computer, move the People+Content IP
icon to the window you want to share.
To Next Page
Loading...
Need help?
General
