Polycom realpresence group 550 User Manual

User’s Guide for the Polycom RealPresence Group Series
Polycom, Inc. 27
Placing a Multipoint Call
How you place a multipoint call depends on whether you’re using a
RealPresence Group system with multipoint capabilities or a bridge such as a
Polycom RMX conference platform. The number of sites allowed in the call is
determined by the capabilities of the system hosting the call.
To place a multipoint call by adding sites to a call:
1 Call the first site.
2 After the call connects, press on the remote control to open the
dialing keypad.
3 Place a call to the next site. For more information, refer to Placing a Call
on page 9.
4 Repeat the above steps until all sites are connected.
To place a multipoint call using Contacts:
1 Using your remote control, select > Place a Call or Add a Call and
select Contacts.
2 Highlight an entry in the Contacts list.
3 To place the call, press or navigate to Call.
You cannot host multipoint calls with a RealPresence Group 300 or 550 system.
After you have placed the first call, the Add a Call menu is displayed instead of
the Place a Call menu.

Polycom realpresence group 550 Specifications

General

Brand	Polycom
Model	realpresence group 550
Category	Conference System
Language	English