Polycom realpresence group 550 User Manual

User’s Guide for the Polycom RealPresence Group Series
22 Polycom, Inc.
To stop showing content:
1 If the People+Content IP toolbar is minimized, maximize it by clicking
the icon in the task bar.
2 Click in People+Content IP.
3 Click Disconnect.
Showing Content from a Computer Connected Directly to
RealPresence Group Systems
Before you show content, check that the computer video output is configured
to use one of these supported resolutions and refresh rates. For best video
quality, use refresh rates of 60 Hz or less.
To set up your RealPresence Group system to show content:
>> Make sure the computer is powered on and connected to the RealPresence
Group system. You can connect a computer to the HDMI or VGA video
input.
Resolution Refresh rates (Hz)
800 x 600 56, 60, 72, 75, 85
1024 x 768 60, 70, 75, 85
1280 x 720 50, 60
1280 x 768 60
1280 x 1024 60, 75, 85
1600 x 1200 60
1680 x 1050 60
1920 x 1080 60
1920 x 1200 60
The way you set the resolution and refresh rate differs, depending on the type
of operating system you have. Check your computer’s manual or help topics for
the appropriate steps.

Polycom realpresence group 550 Specifications

General

Brand	Polycom
Model	realpresence group 550
Category	Conference System
Language	English