Polycom realpresence group 550 User Manual

User’s Guide for the Polycom RealPresence Group Series
Polycom, Inc. 3
Using the Remote Control
You use the remote control to place calls, adjust the volume, zoom the camera,
navigate screens, and select options.
HDCI cameras and the Polycom RealPresence Group 550 system have infrared
receivers. You can always control the RealPresence Group 550 system by
pointing the remote control towards either the Polycom RealPresence
Group 550 system hardware or to the HDCI camera (if connected).
You may need a special cable to connect an SDI camera to the system so as to
receive infrared signals from the remote control. For more information about
the special cable, contact your Polycom support.
Polycom RealPresence Group systems can be configured to show only those
options used in your organization. Therefore, this guide might cover options that
you cannot access on your system. To find out more about these options,
please talk to your administrator.

Polycom realpresence group 550 Specifications

General

Brand	Polycom
Model	realpresence group 550
Category	Conference System
Language	English