Polycom SoundPoint IP 335 User Manual

Getting Started with Your SoundPoint IP 335 Phone
1 - 4
Connecting Network and Power Source
Use Power over Ethernet (PoE) for network and power source connections
unless otherwise directed by your system administrator.
Power over Ethernet
Using a regular CAT5 cable (optional accessory from Polycom), the phone can
be powered from a PoE (IEEE 802.3af) compliant switch or hub.
To connect using a PoE source:
• Plug the supplied network cable between the LAN jack on the phone and
an available power and data port on the in-line power switch.
Note
The AC power adapter is a separate, optional accessory. Your system administrator
will provide one if necessary.
Power Adapter
(Optional Accessory)
IEEE802.3af compliant PoE
Hub/Switch/Midspan Unit
Optional PC Port
(SoundPoint IP 33x Only)
Note
The SoundPoint IP 335 phone has an optional PC connection.
If you want to use the optional PC connection on the SoundPoint IP 335, a separate
ferrite clamp (not included) is required. Contact your system administrator.

Polycom SoundPoint IP 335 Specifications

Operating Environment

operating temperature	0 to 40°C
operating relative humidity	5% to 95%, non-condensing
storage temperature	-40 to +70°C

Power

power over ethernet	IEEE 802.3af Class2
external AC adapter voltage	24V DC
external AC adapter current	500mA

Weight and Dimensions

phone weight	0.625 kg
unit box dimensions	25 cm x 10.5 cm x 29.5 cm
unit box weight	1.49 kg
size	17 cm x 14.5 cm x 17.5 cm