Polycom SoundPoint IP 335 User Manual

Using the Features of Your SoundPoint IP 335 Phone
3 - 16
When a call has been on hold for an extended period of time, both visual and
audible alerts appear. Contact your system administrator to determine if this
feature is enabled/disabled, what the time period is, and what sound effects
are available. When active on a call, the sound effects are played at a volume
that is typically lower than the normal ringer volume.
Multiple Calls on Hold
If multiple calls are on hold, use and to switch between the calls,
then press the Resume soft key to retrieve the desired call.
If two or more calls are on hold, an indication appears on the graphic display,
for example “3/4”, indicating that this is the third call out of four calls.
If calls are on hold on more than one Line Key, all calls are combined into a
single call list. The Line Key that a call is associated with is indicated by the line
icon in reverse colors. Pressing a Line Key with calls on hold will place the
current active call on hold and resume the first call on that Line Key.
Returning the Last Call
Last Call Return (LCR) enables you to automatically call back the last
incoming call without having to dial the number.
To call back the last incoming call:
1. Press the More soft key, then the LCR soft key.
2. You can pick up the handset first, then press LCR to place the call on your
handset
Note
As using the Hold feature typically generates music or a beeping tone, avoid putting
a conference call on hold.

Polycom SoundPoint IP 335 Specifications

Operating Environment

operating temperature	0 to 40°C
operating relative humidity	5% to 95%, non-condensing
storage temperature	-40 to +70°C

Power

power over ethernet	IEEE 802.3af Class2
external AC adapter voltage	24V DC
external AC adapter current	500mA

Weight and Dimensions

phone weight	0.625 kg
unit box dimensions	25 cm x 10.5 cm x 29.5 cm
unit box weight	1.49 kg
size	17 cm x 14.5 cm x 17.5 cm