Polycom SoundPoint IP 335 - Answering a Call

Using the Features of Your SoundPoint IP 335 Phone
3 - 4
To place a call using the headset:
1. Do one of the following steps:
a With the optional headset connected, press ,
, or the NewCall soft key to obtain dial tone.
Press .
Dial the desired number using the dial pad.
b With the optional headset connected, dial the desired number using
the dial pad.
Press .
c Press .
You will hear a dial tone. You can enter the desired number now.
To place a call using the Dial key:
1. Do one of the following steps:
a Press the Callers soft key to view the Receive Call list.
b Press to view the Placed Call list.
2. Use and to scroll through the list to find the contact.
3. Press to complete the call.
Answering a Call
When you are not in another call, you can answer a call in three basic ways
using your SoundPoint IP 335 phone:
• Using the handset
• Using the speakerphone
• Using the headset
The steps for answering an incoming call when you are in another call are
different if your phone is configured for:
Note
To permanently enable your headset, refer to Headset Memory Mode on page 2-5.