Polycom SoundPoint IP 335 User Manual

Using the Features of Your SoundPoint IP 335 Phone
3 - 3
During a call, you can alternate between Handset, Headset, or Hands-Free
Speakerphone modes by pressing the or keys, or picking up the
handset.
Call duration on an active call is monitored through a local call timer. This is
visible within the active call window on the graphic display. In the figure
below, the call to James Dean has lasted 2 hours 48 minutes 23 seconds so far.
To place a call using the handset:
1. Do the following steps in any order:
— Pick up the handset.
— Dial the desired number using the dial pad.
To place a call using Hands-Free Speakerphone mode:
1. Do one of the following steps:
a With the handset on-hook, press , , ,
or the NewCall soft key to obtain dial tone.
Dial the desired number using the dial pad.
b With the handset on-hook, dial the desired number using the dial pad.
Press , , or .
Note
URL or IP dialing is not supported on registered phones. If your phone is
intentionally unregistered, the default dialing mode is by URL.
Note
If “Handsfree mode disabled” appears on the graphic display after you press the
speakerphone key
, your system administrator has disabled the speakerphone on
your phone.

Polycom SoundPoint IP 335 Specifications

Operating Environment

operating temperature	0 to 40°C
operating relative humidity	5% to 95%, non-condensing
storage temperature	-40 to +70°C

Power

power over ethernet	IEEE 802.3af Class2
external AC adapter voltage	24V DC
external AC adapter current	500mA

Weight and Dimensions

phone weight	0.625 kg
unit box dimensions	25 cm x 10.5 cm x 29.5 cm
unit box weight	1.49 kg
size	17 cm x 14.5 cm x 17.5 cm