Polycom SoundPoint IP 335 User Manual

Customizing Your SoundPoint IP 335 Phone
2 - 20
5. Press repeatedly until the Ring Type field is displayed.
6. Press to edit the Ring Type.
7. Enter the number corresponding to one of the ring types available.
For more information, refer to Ring Type on page 2-7.
8. (Optional) To remove an existing value, press .
9. Press the Ok or Cancel soft keys to accept or cancel changes.
10. Press repeatedly to return to the idle display.
Rejecting Calls
You can customize your phone so that incoming calls from a particular party
are immediately sent to your voice mail.
To send incoming calls from a particular contact directly to voice mail:
1. Press then select Features > Contact Directory.
2. Use and to scroll through the list to find the contact.
3. Press to select the entry.
4. Press the Edit soft key.
5. Press repeatedly until the Auto Reject field is displayed.
6. Press , and then to change between Disabled and Enabled.
7. Press the Ok or Cancel soft keys to accept or cancel changes.
Note
This feature is local to the phone, and may be overridden by your organization’s
settings. For more information, contact your system administrator.
Note
Rejecting calls is not available on shared lines.

Polycom SoundPoint IP 335 Specifications

Operating Environment

operating temperature	0 to 40°C
operating relative humidity	5% to 95%, non-condensing
storage temperature	-40 to +70°C

Power

power over ethernet	IEEE 802.3af Class2
external AC adapter voltage	24V DC
external AC adapter current	500mA

Weight and Dimensions

phone weight	0.625 kg
unit box dimensions	25 cm x 10.5 cm x 29.5 cm
unit box weight	1.49 kg
size	17 cm x 14.5 cm x 17.5 cm