Polycom SoundPoint IP 335 User Manual

Using the Features of Your SoundPoint IP 335 Phone
3 - 15
Enabling Do Not Disturb
Press and then select Features > Do not disturb to prevent the
phone from ringing on incoming calls. A flashing icon and text on the graphic
display indicates that Do Not Disturb is on.
Calls received while Do Not Disturb is enabled are logged in the Missed Calls
list unless configured to be forwarded to another party by your system
administrator.
To disable Do Not Disturb, press and then select Features > Do
not disturb again.
Multiple Lines and Do Not Disturb
If multiple lines are configured on your phone, Do Not Disturb can be set on a
line-by-line basis from the list using and . For more information,
contact your system administrator. When Do Not Disturb is enabled for a
particular line, this is indicated by a flashing “X” beside the line indicator on
the display.
Placing a Call on Hold
During a call, press . This will be indicated on the graphic display by the
hold icon as the line indicator.
Press again or the Resume soft key to resume the call. The active audio
icon (one of , , or ) appears as the line indicator.
Note
This feature is local to the phone, and may be overridden by call server settings.
For more information, contact your system administrator.

Polycom SoundPoint IP 335 Specifications

Operating Environment

operating temperature	0 to 40°C
operating relative humidity	5% to 95%, non-condensing
storage temperature	-40 to +70°C

Power

power over ethernet	IEEE 802.3af Class2
external AC adapter voltage	24V DC
external AC adapter current	500mA

Weight and Dimensions

phone weight	0.625 kg
unit box dimensions	25 cm x 10.5 cm x 29.5 cm
unit box weight	1.49 kg
size	17 cm x 14.5 cm x 17.5 cm