Polycom SoundPoint IP 335 User Manual

3 - 1
3
Using the Features of Your SoundPoint
IP 335 Phone
Your SoundPoint IP 335 phone is designed to be used like a regular phone on
a public switched telephone network (PSTN). You can place calls, transfer a
call to someone else, or conduct a conference call.
At any time, only one active call may be in progress on your phone. The active
call is the one that has audio associated with it. There may be up to three other
calls on hold or in an “Incoming call” or “Ringing” state on a particular line.
Use and to switch between these calls. With two lines, there can
be maximum of four calls or two conferences on your phone.
This chapter provides basic operating instructions for the SoundPoint IP 335
phone. This chapter contains instructions on:
• Placing a Call
• Answering a Call
• Ending a Call
• Redialing
• Setting Up Conference Calls
• Transferring Calls
• Forwarding Calls
• Enabling Do Not Disturb
• Placing a Call on Hold
• Returning the Last Call
• Using the Intercom
• Using the Auto Attendant
• Parking a Call

Polycom SoundPoint IP 335 Specifications

Operating Environment

operating temperature	0 to 40°C
operating relative humidity	5% to 95%, non-condensing
storage temperature	-40 to +70°C

Power

power over ethernet	IEEE 802.3af Class2
external AC adapter voltage	24V DC
external AC adapter current	500mA

Weight and Dimensions

phone weight	0.625 kg
unit box dimensions	25 cm x 10.5 cm x 29.5 cm
unit box weight	1.49 kg
size	17 cm x 14.5 cm x 17.5 cm