Polycom SoundPoint IP 335 User Manual

Customizing Your SoundPoint IP 335 Phone
2 - 21
8. Press repeatedly to return to the idle display.
Diverting Calls
You can customize your phone so that incoming calls from a particular party
are transferred directly to a third party.
To divert incoming calls from a particular contact:
1. Press then select Features > Contact Directory.
2. Use and to scroll through the list to find the contact.
3. Press to select the entry.
4. Press the Edit soft key.
5. Press repeatedly until the Divert Contact field is displayed.
6. Press .
7. Enter the number of the party to whom you want to divert the call.
8. Press the Ok or Cancel soft keys to accept or cancel changes.
9. Scroll down to the Auto Divert field.
10. Press , and then to change between Disabled and Enabled.
11. Press the Ok or Cancel soft keys to accept or cancel changes.
12. Press repeatedly to return to the idle display.
Note
Dual-tone multi-frequency (DTMF) signaling is not available while a call is incoming.
You may resume DTMF signaling by pressing the Reject soft key (for private lines)
or the Ignore soft key (for private and shared lines). For more information, contact
your system administrator.

Polycom SoundPoint IP 335 Specifications

Operating Environment

operating temperature	0 to 40°C
operating relative humidity	5% to 95%, non-condensing
storage temperature	-40 to +70°C

Power

power over ethernet	IEEE 802.3af Class2
external AC adapter voltage	24V DC
external AC adapter current	500mA

Weight and Dimensions

phone weight	0.625 kg
unit box dimensions	25 cm x 10.5 cm x 29.5 cm
unit box weight	1.49 kg
size	17 cm x 14.5 cm x 17.5 cm