Polycom SoundPoint IP 335 User Manual

Using the Features of Your SoundPoint IP 335 Phone
3 - 9
2. Press Conf soft key to create a new call.
The active call is placed on hold.
3. Call the second party.
4. When the second party answers, press the Conf soft key again to join all
parties in the conference.
To split a conference call:
¾ Press the Split soft key to split the conference.
Both parties will be on hold.
To set up a conference call using the Join soft key:
¾ When you are in an active call:
a If you have one call on hold (on the same line or other line), use
to go to the call on hold, then press the Join soft key.
A conference is created with the active call, the call on hold and
yourself.
b If you have more than one call on hold, use and to switch
to the desired call on hold, press the Join soft key.
A conference is created with active call, the call on hold and yourself.
To end a conference call:
¾ Press the EndCall soft key or hang up.
The other parties will continue to be connected.
Note
You can either dial the phone number directly or search for the number in the
Contact Directory or Call Lists. For more information, refer to Placing a Call on page
3-2, Searching For a Contact on page 2-18, or Managing Call Lists on page 2-9.

Polycom SoundPoint IP 335 Specifications

Operating Environment

operating temperature	0 to 40°C
operating relative humidity	5% to 95%, non-condensing
storage temperature	-40 to +70°C

Power

power over ethernet	IEEE 802.3af Class2
external AC adapter voltage	24V DC
external AC adapter current	500mA

Weight and Dimensions

phone weight	0.625 kg
unit box dimensions	25 cm x 10.5 cm x 29.5 cm
unit box weight	1.49 kg
size	17 cm x 14.5 cm x 17.5 cm