Why Corporate Directory is unavailable on Polycom IP Phone?
If you’re trying to access Corporate Directory on your Polycom IP Phone, but it isn’t available, the license might not be installed on your phone or it has expired. To verify, press, then select Status > Licenses. From the Licenses screen, verify that Corporate Directory has a valid license.
General| Frequency range | 250 - 7000 Hz |
|---|---|
| Power over Ethernet (PoE) | Yes |
| Compliance industry standards | IEEE 802.3, IEEE 802.3u |
| Ethernet LAN (RJ-45) ports | 1 |
| Power consumption (typical) | 19 W |
| Operating temperature (T-T) | 5 - 40 °C |
| Harmonized System (HS) code | 85258900 |
Weight and Dimensions| Weight | 520 g |
|---|---|
| Dimensions (WxDxH) | 265 x 285 x 65 mm |
Describes the process of installing your new Polycom conference phone.
Explains the two methods for connecting the phone to network and power.
Details the procedure for registering the phone with the system.
Highlights the primary hardware features of the phone console.
Covers initial setup for fundamental phone preferences like language and display.
Controls audio levels for the speaker and ringer.
Stores, searches, and manages phone contacts.
Adds new contacts to the phone's local directory.
Manually enters contact details into the local directory.
Locates contacts within local or corporate directories.
Finds contacts by searching the local directory.
Finds contacts by searching the corporate directory.
Dials contacts directly from local or corporate directories.
Handles and customizes incoming call behavior.
Instructions for initiating calls using various methods like off-hook or URL.
Dials numbers quickly using preset speed dial entries.
Procedures for responding to incoming calls.
How to terminate an ongoing call.
Disables microphone audio transmission during a call.
Places active calls on hold and retrieves them.
Sets up and manages multi-party conference calls.
To Next Page
