Polycom SoundStation IP 6000 User Manual

2 - 1
2
Customizing Your Phone
You can customize your SoundStation IP 6000 conference phone by adjusting
certain settings, including language, volume, time and date, display contrast,
backlight intensity, and ring type. You can also add contacts to the phone’s
local Contact Directory.
This chapter shows you how to customize your phone. It includes the
following topics:
• Configuring Basic Settings on page 2-1
• Adjusting the Speaker and Ringer Volume on page 2-8
• Using Call Lists on page 2-8
• Managing Contacts on page 2-10
• Managing Incoming Calls on page 2-21
• Understanding Shared Lines on page 2-24
Some customizations, including shared lines and viewing a
Corporate Directory, must be set up by your system administrator.
Configuring Basic Settings
To configure basic phone settings, press , and then select
Settings > Basic to view the basic phone settings you can customize.
This section includes the following topics:
• Updating Preferences
• Updating the Display Contrast
• Updating the Backlight
• Updating the Ring Tone

Polycom SoundStation IP 6000 Specifications

General

Network Interface	10/100 Ethernet
Power over Ethernet (PoE)	Yes, IEEE 802.3af
SIP Protocol Support	Yes
Connectivity Technology	Wired
Echo Cancellation	Yes
Noise Reduction	Yes
Speakerphone	Full-duplex
Microphones	3 cardioid microphones
Microphone Type	Cardioid
Display	Backlit LCD display
Audio Technology	HD Voice, Acoustic Clarity Technology
Protocols	SIP
Network Ports	1
Power Source	PoE or optional AC adapter
Weight	1.75 lbs
Compliance	FCC
Dimensions	14.5 x 12.25 x 2.5 in (36.8 x 31.1 x 6.4 cm)