Customizing Your Phone
2 - 21
To place a call to a contact in the Corporate Directory:
1. Press , and then select Features > Corporate Directory.
The Corporate Directory search screen displays.
2. Scroll to the contact you want to call. Or, search for the contact (see
Searching for Contacts in Your Corporate Directory on page 2-17).
To scroll through a list of contacts, use the * key to Page Up and the # key
to Page Down.
3. Press the Dial soft key.
Managing Incoming Calls
You can manage incoming calls from the contacts in your Contact Directory by
doing the following:
• Setting up a distinctive ring tone for a contact.
• Rejecting calls from a particular contact by sending the call to your
voice mail system. (If you do not have a voice mail system set up, the call
will still ring on your phone.)
• Diverting calls from a particular contact to another party.
Distinguishing Calls
You can customize your phone so that you can distinguish callers by certain
ring tones. For information on setting a distinctive ring tone for a particular
contact, see Setting Distinctive Ring Tones for Contacts on page 2-7.
Note
If you have enabled your phone to save the results of your last search (or
remember the last contact you selected), your previous search results (or the
contact), will display instead of a blank search screen. To enable this feature, see
Enabling Your Phone to Save Corporate Directory Search Results on page 2-12.
To Next Page
Loading...
Need help?
General
