Polycom SoundStation IP 6000 User Manual

User Guide for the Polycom SoundStation IP 6000 Phone
2 - 8
3. Press the Edit soft key.
The Edit Contact screen displays.
4. Use the Next soft key to scroll to Ring Type, and then use
to select
a ring type.
5. Press the Save soft key.
6. Press to return to the idle screen.
Adjusting the Speaker and Ringer Volume
To adjust the speaker volume:
>> During a call, press either or .
To adjust the ringer volume:
>> When the phone is in the idle state, press either or .
Using Call Lists
Your phone maintains lists of missed, received and placed calls. Each list can
hold up to 100 entries. If you miss a call, the idle screen will display a message
indicating the number of missed calls you have. To view information about the
missed call, view your Missed Calls list (see Viewing Call Lists on page 2-9).
After you view the Missed Calls list, the message on the idle screen is removed.
The following figure shows what the idle screen looks like when you miss a
call.

Polycom SoundStation IP 6000 Specifications

General

Network Interface	10/100 Ethernet
Power over Ethernet (PoE)	Yes, IEEE 802.3af
SIP Protocol Support	Yes
Connectivity Technology	Wired
Echo Cancellation	Yes
Noise Reduction	Yes
Speakerphone	Full-duplex
Microphones	3 cardioid microphones
Microphone Type	Cardioid
Display	Backlit LCD display
Audio Technology	HD Voice, Acoustic Clarity Technology
Protocols	SIP
Network Ports	1
Power Source	PoE or optional AC adapter
Weight	1.75 lbs
Compliance	FCC
Dimensions	14.5 x 12.25 x 2.5 in (36.8 x 31.1 x 6.4 cm)