Polycom SoundStation IP 6000 User Manual

Customizing Your Phone
2 - 23
Diverting Calls
You can customize your phone so that incoming calls from a particular party
are transferred directly to a third party.
To divert incoming calls from a contact to a third party:
1. Press , and then select Features > Contact Directory.
The Directory screen displays.
2. Scroll to the contact for whom you want to transfer calls. Or, search for
the contact (see Searching for Contacts on page 2-17).
To scroll through a list of contacts, use the * key to Page Up and the # key
to Page Down.
3. Press the Edit soft key.
The Edit Contact screen displays.
4. Use the Next soft key to scroll to the Divert Contact field, and then enter
the number of the party to whom you want to divert the call.
You can enter a maximum of 32 characters.
5. Use the Next soft key to scroll to the Auto Divert field, and then change
the Auto Divert setting to Enabled. Use the scroll keys or the Change soft
key to select Enabled.
6. Press the Save soft key.
7. Press to return to the idle screen.

Polycom SoundStation IP 6000 Specifications

General

Network Interface	10/100 Ethernet
Power over Ethernet (PoE)	Yes, IEEE 802.3af
SIP Protocol Support	Yes
Connectivity Technology	Wired
Echo Cancellation	Yes
Noise Reduction	Yes
Speakerphone	Full-duplex
Microphones	3 cardioid microphones
Microphone Type	Cardioid
Display	Backlit LCD display
Audio Technology	HD Voice, Acoustic Clarity Technology
Protocols	SIP
Network Ports	1
Power Source	PoE or optional AC adapter
Weight	1.75 lbs
Compliance	FCC
Dimensions	14.5 x 12.25 x 2.5 in (36.8 x 31.1 x 6.4 cm)