Polycom SoundStation IP 6000 User Manual

Using the Basic Features of Your Phone
3 - 13
To disable call forwarding:
1. From the idle screen, press the Forward soft key.
The Forwarding Type Select screen displays, showing the forwarding type
that is enabled.
The following screen shows the forwarding type Always enabled.
2. Scroll to the forwarding type you want to change, and then press .
A screen displays showing the forwarding details.
3. To turn off call forwarding, press the Disable soft key.
Forwarding Calls Dynamically
You can manually forward a call to another number while your phone rings.
To forward an incoming call to another extension:
1. While your phone rings, press the Forward soft key.
The Call Forwarding screen displays.
2. Enter the number to forward the incoming call to.
Your phone displays the last number you forwarded calls to (either
statically or dynamically). If you previously set a forwarding number and
want to enter a new one, use the << soft key to delete the number.
3. Press the Forward soft key.
The incoming call is forwarded to the other party. If call forwarding is
disabled, future calls will not be forwarded and forwarding remains disabled.

Polycom SoundStation IP 6000 Specifications

General

Network Interface	10/100 Ethernet
Power over Ethernet (PoE)	Yes, IEEE 802.3af
SIP Protocol Support	Yes
Connectivity Technology	Wired
Echo Cancellation	Yes
Noise Reduction	Yes
Speakerphone	Full-duplex
Microphones	3 cardioid microphones
Microphone Type	Cardioid
Display	Backlit LCD display
Audio Technology	HD Voice, Acoustic Clarity Technology
Protocols	SIP
Network Ports	1
Power Source	PoE or optional AC adapter
Weight	1.75 lbs
Compliance	FCC
Dimensions	14.5 x 12.25 x 2.5 in (36.8 x 31.1 x 6.4 cm)