Polycom SoundStation IP 6000 User Manual

User Guide for the Polycom SoundStation IP 6000 Phone
3 - 12
3. Do one of the following:
— If you selected Always, the Call Forward Always screen displays
(as shown next). Enter a forwarding number.
— If you selected No Answer, the Call Forward No Answer screen
displays.
Do the following (use the Next and Prev soft keys to move between
fields):
a In the Contact field, enter a number to forward all unanswered
incoming calls to.
b In the Forward After Rings field, enter how many rings to wait
before forwarding the call. One ring is approximately six seconds.
Two rings is the recommended value.
If you selected Busy, the Call Forward Busy screen displays (as shown
next). Enter a number to forward all future incoming calls to when you
are already in another call.
4. Press the Enable soft key.
After you’ve enabled call forwarding, the forwarding number scrolls in the
status bar. If you selected the Always forwarding type, a moving arrow
displays on the idle screen next to the directory number.

Polycom SoundStation IP 6000 Specifications

General

Network Interface	10/100 Ethernet
Power over Ethernet (PoE)	Yes, IEEE 802.3af
SIP Protocol Support	Yes
Connectivity Technology	Wired
Echo Cancellation	Yes
Noise Reduction	Yes
Speakerphone	Full-duplex
Microphones	3 cardioid microphones
Microphone Type	Cardioid
Display	Backlit LCD display
Audio Technology	HD Voice, Acoustic Clarity Technology
Protocols	SIP
Network Ports	1
Power Source	PoE or optional AC adapter
Weight	1.75 lbs
Compliance	FCC
Dimensions	14.5 x 12.25 x 2.5 in (36.8 x 31.1 x 6.4 cm)