Polycom SoundStation IP 6000 User Manual

Customizing Your Phone
2 - 7
Selecting a Ring Tone
You can choose a unique ring tone for your phone to identify it when it rings.
To select a different ring tone:
1. Press , and then select Settings > Basic > Ring Type.
The Ring Type screen displays.
2. Scroll to the ring type you want. To hear the ring type before you select it,
press the Play soft key. The default ring type is Low Trill.
3. To select the ring type, press .
4. Press to return to the idle screen.
Setting Distinctive Ring Tones for Contacts
You can set a distinctive ring tone for each contact in your Contact Directory
so you can distinguish callers.
To set a distinctive ring tone for a local contact:
1. Press , and then select Features > Contact Directory.
The Directory screen displays.
2. Scroll to the contact for whom you want to assign a distinctive ring tone.
Note
Your company’s settings may override this feature. For more information, contact
your system administrator.

Polycom SoundStation IP 6000 Specifications

General

Network Interface	10/100 Ethernet
Power over Ethernet (PoE)	Yes, IEEE 802.3af
SIP Protocol Support	Yes
Connectivity Technology	Wired
Echo Cancellation	Yes
Noise Reduction	Yes
Speakerphone	Full-duplex
Microphones	3 cardioid microphones
Microphone Type	Cardioid
Display	Backlit LCD display
Audio Technology	HD Voice, Acoustic Clarity Technology
Protocols	SIP
Network Ports	1
Power Source	PoE or optional AC adapter
Weight	1.75 lbs
Compliance	FCC
Dimensions	14.5 x 12.25 x 2.5 in (36.8 x 31.1 x 6.4 cm)