Polycom SoundStation IP 6000 User Manual

Using the Advanced Features of Your Phone
4 - 3
To change your presence setting:
1. Do one of the following:
— Press , and then select Features > Presence > My Status.
or
— From the idle screen, press the MyStat soft key.
The My Status screen displays.
2. Scroll to the status you want, and then press . The default status is
Online.
3. Press to return to the idle screen.
The following figure shows what the idle screen looks like when you set your
status as Be right back. If you set your status as Online (the default status), the
presence status does not display on the screen.
Selecting Contacts to Monitor
Select the contacts whose presence you want to monitor by updating the
contacts in your buddy list. You add contacts to your buddy list from your
local Contact Directory. To view the status of contacts in your buddy list, see
Monitoring the Status of Contacts in Your Buddy List on page 4-6.
To update your buddy list:
1. Press , and then select Features > Contact Directory.
2. From the Directory, scroll to the contact. Or, search for the contact (see
Searching for Contacts in Your Local Contact Directory on page 2-17).
To scroll through a list of contacts, use the * key to Page Up and the # key
to Page Down.

Polycom SoundStation IP 6000 Specifications

General

Network Interface	10/100 Ethernet
Power over Ethernet (PoE)	Yes, IEEE 802.3af
SIP Protocol Support	Yes
Connectivity Technology	Wired
Echo Cancellation	Yes
Noise Reduction	Yes
Speakerphone	Full-duplex
Microphones	3 cardioid microphones
Microphone Type	Cardioid
Display	Backlit LCD display
Audio Technology	HD Voice, Acoustic Clarity Technology
Protocols	SIP
Network Ports	1
Power Source	PoE or optional AC adapter
Weight	1.75 lbs
Compliance	FCC
Dimensions	14.5 x 12.25 x 2.5 in (36.8 x 31.1 x 6.4 cm)