Polycom SoundStation IP 6000 User Manual

1 - 1
1
Getting Started with Your Phone
Before you use your phone, you need to connect your phone to the network
and a power source, and become familiar with your phone’s features. This
chapter describes how to set up the phone, the phone’s features, the icons that
display on the phone screen, and how to navigate menus and enter data. It also
includes information on how to remotely configure your phone from a
computer.
The topics include:
• Setting Up the Phone on page 1-2
• Features of the Phone on page 1-6
• Understanding Line and Call Icons on page 1-9
• Navigating Menus and Entering Data on page 1-10
• Configuring Your Phone Using the Polycom Web Configuration Utility on
page 1-12
To read about how to change the settings on your phone, see Chapter 2,
Customizing Your Phone. To read about the phone’s basic features, see
Chapter 3, Using the Basic Features of Your Phone. To read about more
advanced features, see Chapter 4, Using the Advanced Features of Your
Phone.
If you require additional information or assistance with your new phone, see
your system administrator.
Note
Since you can customize your phone in many different ways, and your system
administrator can enable and disable certain features, the user interface that
displays on your phone may differ from the figures that appear in this guide.

Polycom SoundStation IP 6000 Specifications

General

Network Interface	10/100 Ethernet
Power over Ethernet (PoE)	Yes, IEEE 802.3af
SIP Protocol Support	Yes
Connectivity Technology	Wired
Echo Cancellation	Yes
Noise Reduction	Yes
Speakerphone	Full-duplex
Microphones	3 cardioid microphones
Microphone Type	Cardioid
Display	Backlit LCD display
Audio Technology	HD Voice, Acoustic Clarity Technology
Protocols	SIP
Network Ports	1
Power Source	PoE or optional AC adapter
Weight	1.75 lbs
Compliance	FCC
Dimensions	14.5 x 12.25 x 2.5 in (36.8 x 31.1 x 6.4 cm)