Polycom SoundStation IP 6000 User Manual

Using the Basic Features of Your Phone
3 - 11
Forwarding Calls
You can set up your phone to forward incoming calls to another party
(static forwarding), or you can forward a call as your phone rings
(dynamic forwarding). Your phone will forward calls even if you enable the
Do Not Disturb Feature.
You can also reject calls from a particular contact by sending the call to your
voice mail system, or divert calls from a particular contact to another party. For
more information, see Managing Incoming Calls on page 2-21.
To access forwarding options:
>> Do one of the following:
— Press , and then select Features > Forward.
or
— From the idle screen, press the Forward soft key.
Forwarding Calls Statically
You can set up your phone to forward calls to another number.
To forward calls to another extension:
1. From the idle screen, press the Forward soft key.
The Forwarding Type Select screen displays.
2. Scroll to the forwarding type you want, and then press . The
options are:
— Always—To forward all incoming calls.
—No Answer—To forward all unanswered incoming calls.
—Busy—To forward calls that arrive when you are already in a call.
Note
Your company’s settings may override this feature. Call forwarding is not available
on shared lines.

Polycom SoundStation IP 6000 Specifications

General

Network Interface	10/100 Ethernet
Power over Ethernet (PoE)	Yes, IEEE 802.3af
SIP Protocol Support	Yes
Connectivity Technology	Wired
Echo Cancellation	Yes
Noise Reduction	Yes
Speakerphone	Full-duplex
Microphones	3 cardioid microphones
Microphone Type	Cardioid
Display	Backlit LCD display
Audio Technology	HD Voice, Acoustic Clarity Technology
Protocols	SIP
Network Ports	1
Power Source	PoE or optional AC adapter
Weight	1.75 lbs
Compliance	FCC
Dimensions	14.5 x 12.25 x 2.5 in (36.8 x 31.1 x 6.4 cm)