Polycom SoundStation IP 6000 User Manual

User Guide for the Polycom SoundStation IP 6000 Phone
3 - 14
Using Do Not Disturb
To prevent your phone from ringing, activate the Do Not Disturb feature.
Calls you receive while Do Not Disturb is enabled will display in your
Missed Calls Call List (see Using Call Lists on page 2-8). If you have chosen to
forward your calls to another number, calls will be sent to that number if
Do Not Disturb is enabled.
To enable and disable Do Not Disturb:
1. Press , and then select Features.
The Features screen displays. If Do Not Disturb is not highlighted, scroll
to it.
2. To toggle Do Not Disturb on or off, press .
When you enable Do Not Disturb, a flashing icon, , displays at the
top left of the screen. When you disable Do Not Disturb, the registered line
icon, , displays instead.
The following figure shows what the Features menu looks like with
Do Not Disturb enabled.
3. Press to return to the idle screen.
If you enabled Do Not Disturb, the idle screen displays a flashing icon, ,
next to the directory number.

Polycom SoundStation IP 6000 Specifications

General

Network Interface	10/100 Ethernet
Power over Ethernet (PoE)	Yes, IEEE 802.3af
SIP Protocol Support	Yes
Connectivity Technology	Wired
Echo Cancellation	Yes
Noise Reduction	Yes
Speakerphone	Full-duplex
Microphones	3 cardioid microphones
Microphone Type	Cardioid
Display	Backlit LCD display
Audio Technology	HD Voice, Acoustic Clarity Technology
Protocols	SIP
Network Ports	1
Power Source	PoE or optional AC adapter
Weight	1.75 lbs
Compliance	FCC
Dimensions	14.5 x 12.25 x 2.5 in (36.8 x 31.1 x 6.4 cm)