Polycom SoundStation IP 6000 User Manual

User Guide for the Polycom SoundStation IP 6000 Phone
2 - 22
Rejecting Calls
You can customize your phone so that incoming calls from a particular party
are immediately sent to your voice mail system. (If you do not have a voice
mail system set up, the call will still ring on your phone.)
To send incoming calls from a particular contact directly to voice mail:
1. Press , and then select Features > Contact Directory.
The Directory screen displays.
2. Scroll to the contact. Or, search for the contact (see Searching for Contacts
in Your Local Contact Directory on page 2-17).
To scroll through a list of contacts, use the * key to Page Up and the # key
to Page Down.
3. Press the Edit soft key.
The Edit Contact screen displays.
4. Use the Next soft key to scroll to the Auto Reject field, and then change
the Auto Reject setting to Enabled. Use the scroll keys or the
Change soft key to select Enabled.
5. Press the Save soft key.
6. Press to return to the idle screen.
Note
Rejecting calls is not available on shared lines.

Polycom SoundStation IP 6000 Specifications

General

Network Interface	10/100 Ethernet
Power over Ethernet (PoE)	Yes, IEEE 802.3af
SIP Protocol Support	Yes
Connectivity Technology	Wired
Echo Cancellation	Yes
Noise Reduction	Yes
Speakerphone	Full-duplex
Microphones	3 cardioid microphones
Microphone Type	Cardioid
Display	Backlit LCD display
Audio Technology	HD Voice, Acoustic Clarity Technology
Protocols	SIP
Network Ports	1
Power Source	PoE or optional AC adapter
Weight	1.75 lbs
Compliance	FCC
Dimensions	14.5 x 12.25 x 2.5 in (36.8 x 31.1 x 6.4 cm)