Polycom SoundStation IP 6000 User Manual

Using the Basic Features of Your Phone
3 - 7
Setting Up a Conference Using the Conference Soft Key
To set up a conference using the Conference soft key:
1. Call the first party.
2. When the first party answers, press the Confrnc soft key. The active call is
placed on hold.
3. Enter the number of the second party, and then press the Send soft key.
4. When the second party answers, press the Confrnc soft key to join all
parties in the conference.
The Active:Conference screen displays.
Setting Up a Conference with an Active Call and a Call on Hold
If you are currently in an active call, and you have another call on hold, you
can create a conference call between the active call, the call on hold, and
yourself, by pressing the Join soft key.
Note
If configured for single key-press conferences, the conference participant hears the
dial tone and ringback when the conference host places the call to the new party.
Note
If configured for single key-press conferences, you do not have to press the
Confrnc soft key again.

Polycom SoundStation IP 6000 Specifications

General

Network Interface	10/100 Ethernet
Power over Ethernet (PoE)	Yes, IEEE 802.3af
SIP Protocol Support	Yes
Connectivity Technology	Wired
Echo Cancellation	Yes
Noise Reduction	Yes
Speakerphone	Full-duplex
Microphones	3 cardioid microphones
Microphone Type	Cardioid
Display	Backlit LCD display
Audio Technology	HD Voice, Acoustic Clarity Technology
Protocols	SIP
Network Ports	1
Power Source	PoE or optional AC adapter
Weight	1.75 lbs
Compliance	FCC
Dimensions	14.5 x 12.25 x 2.5 in (36.8 x 31.1 x 6.4 cm)