Polycom SoundStructure C16 User Manual

Design Guide for the Polycom SoundStructure C16, C12, C8, and SR12
A - 50
phone_flash_delay Set Flash Delay
Description
This parameter sets the delay (in milliseconds) for the phone_flash parameter.
Note that by default, PSTN interfaces use the flash delay determined by their
pstn_country setting. However, they can use the value of this parameter if the
pstn_flash_delay_override parameter is set to 1.
phone_ignore Ignore an Incoming Call
set phone_flash "Phone
Out"
val phone_flash "Phone
Out"
Flashes the phone interface associated with the virtual
channel "Phone Out" to -6dB. Note that the phone out
virtual channel name must be used, not the phone in
virtual channel name.
Argument Argument value
Channel Type Virtual Channel
Value Type Integer
Read/Write Mode Read/Write
Phys Chans Analog Telephony Output
Virt Chans Mono
System Limits Minimum: 100, Maximum: 5000
Default 100
User Limits
Supported
No
Event Source No
Argument Argument value
Channel Type Virtual Channel
Value Type Void
Read/Write Mode Write-Only
Phys Chans Analog Telephony Output, VoIP Telephony Output
Virt Chans Mono
Event Source No

Polycom SoundStructure C16 Specifications

General

Brand	Polycom
Model	SoundStructure C16
Category	Conference System
Language	English