EasyManua.ls Logo

Polyend Synth - Page 30

Polyend Synth
73 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
59
Polyend Synth Manual
58
Polyend Synth Manual
NOTESNOTES
Envelope Filter - Page 2
Attack Decay Sustain
Time: 0.00-10 Sec Time: 0.00-10 Sec Level: 0.00-100%
Filter envelope attack time.
Time for audio to reach max
level.
Filter envelope decay time.
Time between max time to
the sustain level.
Level of audio sustained
while note is still on.
Envelope Amp - Page 1
Attack Decay Sustain
Time: 0.00-10 Sec Time: 0.00-10 Sec Level: 0.00-100%
Amp envelope attack time.
Time for audio to reach max
level.
Amp envelope decay time.
Time between max time to
the sustain level.
Level of audio sustained
while note is still on.
Release
Time: 0.00-10 Sec
Filter envelope release time.
Time from note off to silent.
Release
Time: 0.00-10 Sec
Amp envelope release time.
Time from note off to silent.
Filter - Page 1
Cutoff Resonance Type
Frequency: 20Hz - 20kHz Amount: 0-150% Filter Model
Frequency point at which the
audio is attenuated. Can
also be set to off.
Emphasises the frequencies
at the cutoff position.
Low Pass MG 24, Low Pass
OB 24, Low Pass OB 12.
Classic lter emulations.
Envelope Amount
Amount: -100% to +100%
Amount of envelope applied
to the lter.
Filter LFO
Amount: -100% to +100%
Amount of LFO applied to
the lter.
Synths
5
Synths
5
LFO 1 - Page 1
Frequency Waveform Retrigger
0-100 Hz Options Options
Speed of the LFO Modulation wave shape:
Triangle, Sin, Ramp Up,
Ramp Down, Square,
Random S&H
Waveform retrigger: Free
running will continuously run;
One Shot will cycle once
when a note is triggered;
Note will trigger from the
start and continuously run
each time a note is triggered.

Related product manuals