Polyend Synth - Page 36

71
Polyend Synth Manual
70
Polyend Synth Manual
NOTESNOTES
Engine Oscillator Page 1
Ratio 1 Ratio 2 FM
0.25 - 12 0.25 - 12 0% to +1000%
Oscillator 1 shape. Setting
morphs between triangle,
saw and square.
Oscillator 2 shape. Setting
morphs between triangle,
saw and square.
Overall frequency
modulation application.
Shape 1 Shape 2
0 to 100 0 to 100
Oscillator 1 shape. Morphs
horizontally across the
wavetable wave row.
Oscillator 2 shape. Morphs
horizontally across the
wavetable wave row.
Feedback 1 Feedback 2 Fdbck 2 to 1
0-100% 0-100% 0-100%
Amount of ‘modulator’ 1
audio fed back into the
‘carrier’ 1.
Amount of ‘modulator’ 2
audio fed back into the
‘carrier’ 2.
Amount of ‘modulator’ 2
audio fed back into the
‘carrier’ 1.
Synths
5
Synths
5
Engine Oscillator - Page 2
Finetune 1 Finetune 2 Oversample
-100 to +100 Cents -100 to +100 Cents On - Off
Fine tuning in cents of
oscillator 1
Fine tuning in cents of
oscillator 2
Turns oversampling on or off
in the algorithm. On may
give a higher quality output
but increase CPU usage.
Reset 1 Reset 2
On - Off On - Off
Oscillator 1 wave reset on
note on, on or off
Oscillator 2 wave reset on
note on, on or off
Character 1 Character 2
Options Options
Selects wavetable row.
Refers to type of shape.
Smoother, Sharper, Wilder,
Add 1, Add 2, Add 3, Add 5,
Add 7, Add 11.
Selects wavetable row.
Refers to type of shape.
Smoother, Sharper, Wilder,
Add 1, Add 2, Add 3, Add 5,
Add 7, Add 11.
Engine Oscillator - Page 3
Glide Mode Glide Time Volume
Options 0.00 - 3 Secs 0-200%
Slide between notes:
Always, Overlap, Legato i.e.
Envelopes are not triggered,
Legato Overlap
Time of slide between notes. Volume level of oscillator
voice
Envelope Filter - Page 2
Attack Decay Sustain
Time: 0.00-10 Sec Time: 0.00-10 Sec Level: 0.00-100%
Filter envelope attack time.
Time for audio to reach max
level.
Filter envelope decay time.
Time between max time to
the sustain level.
Level of audio sustained
while note is still on.
Envelope Amp - Page 1
Attack Decay Sustain
Time: 0.00-10 Sec Time: 0.00-10 Sec Level: 0.00-100%
Amp envelope attack time.
Time for audio to reach max
level.
Amp envelope decay time.
Time between max time to
the sustain level.
Level of audio sustained
while note is still on.
Release
Time: 0.00-10 Sec
Filter envelope release time.
Time from note off to silent.
Release
Time: 0.00-10 Sec
Amp envelope release time.
Time from note off to silent.
Filter - Page 1
Cutoff Resonance Type
Frequency: 20Hz - 20kHz Amount: 0-100% Filter Model
Frequency point at which the
audio is attenuated.
Emphasises the frequencies
at the cutoff position.
Low Pass MG 24dB, Low
Pass OB 24dB, Low Pass OB
12dB, Low Pass SVF 24dB,
Low Pass SVF 12dB, Hi Pass
OB 24dB, Hi Pass OB 12dB,
Hi Pass SVF 24dB, Hi Pass
SVF 12dB, Band Pass OB
24dB, Band Pass OB 12dB,
Band Pass SVF 24dB, Band
Pass SVF 12dB, Notch SVF
24dB, Notch SVF 12dB,
Envelope Amount Note Track
Amount: -100% to +100% Amount: -200% to +200%
Amount of envelope applied
to the lter.
Amount of modulation
applied based on the pitch of
the note played.